Model BL1
Back Pressure Regulator
SKU#:
Model BL1
Description
The Model BL1 is a stainless steel back pressure relief regulator designed to handle small to mid-capacity flow rates in sanitary biotechnical process piping systems. This unit is capable of controlling inlet pressure to a level between 2 and 135 psig (.13 and 9.3 Barg).
Pressão de projeto da entrada
- Up to 135 psig (9.3 Barg)
Line Sizes
- 1/2" (DN15)
- 3/4" (DN20)
Conexões finais
- SANITARY TRI-CLAMP
Combinações de materiais: Corpo / Câmara da mola
- Wrought Barstock; ASTM A479, Type 316L SST.
SST = aço inoxidável
Features
- Adjustment Ease: Adjusting knob for frequent set point changes.
- Wetted Materials Construction: All metallic parts are 316L SST. Unit is cleaned to Cashco Spec. #S-1576.
- Surface Finish: Interior of body mechanically polished per ASME BPE (SFV-4). Interior and exterior surfaces are electro-polished.
- Top Guided: A “non-wetted” guide in the topworks above the diaphragm provides stability at all set points.
| Category Label | Back Pressure Regulator |
|---|---|
| Tamanho da linha | 1/2" (DN15), 3/4" (DN20) |
| Conexões finais | Tri-Clamp |
| Aplicativos de processo | Serviço Sanitário |
| Material do corpo | Aço inoxidável |
