Modelo 2171
Back Pressure Regulator
SKU#:
Modelo 2171
Description
The Model 2171 is a stainless steel back pressure/relief regulator designed to handle small to mid-capacity flow rates in general, chemical
or cryogenic services. This unit is capable of controlling inlet pressure to setpoint levels between 5 and 500 psig (.34 and 20.6 Barg).
Pressão de projeto da entrada
- Up to 600 psig (41.4 Barg)
Pressão de saída
- 5 psig (0,34 Barg) a 200 psig (13,8 Barg)
Line Sizes
- 1/4” (DN8)
- 3/8" (DN10)
- 1/2" (DN15)
Conexões finais
- NPT
- Flangeado
- Angle Design: with thru-body connections (2 side inlets; bottom outlet).
- Globe Design: 1/2" only - side inlet, side outlet. No bottom connection.
- Opt-30: 1/2” x 150# or 300# RF Angle-Two connection; side inlet, bottom outlet. (Plugged third connection.)
- Opt-34:1/2"x 150# or 300# RF Globe-Two connection; side inlet, side outlet.
Combinações de materiais: Corpo / Câmara da mola
- SST / BRZ
- SST / SST
BRZ = Cast bronze
SST = Stainless Steel
Features
- Alta estabilidade: O plugue de alta massa permite o amortecimento de distúrbios de alta frequência do lado da entrada ou da saída do regulador.
- Trim Removal: Easily removable trim from valve while in-line by removing screwed-on spring chamber.
- Trim Selections: Seven different trim combinations for metallic or composition seated designs.
- Flow-thru Angle Design: Two side inlet ports; Bottom outlet port.
- Globe Design 1/2" Size: One side inlet port; one side outlet port.
| Category Label | Back Pressure Regulator |
|---|---|
| Serviço | Gases, líquidos, vapor |
| Tamanho da linha | 1/4" (DN8), 3/8" (DN10), 1/2" (DN15) |
| Conexões finais | FNPT, flangeado |
| Aplicativos de processo | Criogênico |
| Tecnologia | Cúpula carregada |
| Material do corpo | Aço inoxidável |
| Tabelas CV |
